PDA

View Full Version : How would you edit this shot?



OZAmateur
31-12-2010, 7:46am
Ive posted this up here as im more interested in how to best edit the shot to really make it stand out.
For now im happy with composition etc, but i know that i can really make this shot sing...only problem is i just dont know how.
I know you can do grad filters, layers to help bring out better detail in the foreground and a targeted adjustment tool to help bring out detail in the pier...but i dont know how or where to look to learn.

Please offer your expertise.

This is a unedited jpeg, i have a full sized RAW image which i intend to use when editing.

nixworries
31-12-2010, 8:07am
i would be interested also to see what steps are needed also.

WhoDo
31-12-2010, 8:44am
Here is my take on your original, OZ. It would have been easier and given better results to work from a full-sized original but I understand the limitations here. Steps below the image:

64944

1. Crop to find the best composition possible - consider Rule of Thirds, leading lines, texture, patterns, points of interest.
2. Perform Levels and Curves adjustments - restore colour and contrast to what you saw
3. Sky lacked colour depth and interest so boosted with Multiply layer at 33%
4. Foreground has good texture but too dark so boosted with Light layer adjustment at 66% and dodged in extra light for particularly dark rock areas.
5. High pass filter sharpen to bring out more detail
6. Edge mask sharpen (very light @ .7, radius 5, threshold 0)

I might have taken more off the top to bring the horizon closer to the top third, but there was already very little to work with in terms of size so I left it in a portrait format. The jetty to the left was too far from the interest and didn't align well so I simply left it out. I considered cloning out the boat as a distraction but at this size it would have taken quite some effort to avoid being obvious in the result. Like I said, working from a full-sized original could have produced significantly better results.

dbax
31-12-2010, 9:50am
Ok heres my take on this one but first what I like about it:D, I like the idea of the wharf on the right leading in though a step or two to the left might have given it more length if you get my drift. I like the sun on the horizon on the opposite side of the frame, and like Waz says above a crop bringing the horizon closer to the third was my first step.

Here goes
Crop so the wharf top rail finishes in the top Left hand corner(helps emphasis a leading line). This crop also brings the horizon close to the upper thirds horizontal line.
Levels adjustment(slight)
Duplicate layer>change blending mode to Multiply>Layer >layer mask >Hide all. Fg colour white >select grad tool>drag from top to just above the rocks.
Duplicate original laver>change blending mode to screen>Layer >layer mask >Hide all. Fg colour white >select grad tool> drag from bottom to just above the rocks.
New empty layer>edit>fill>50% gray>change blending mode to Overlay(this becomes a Dodge and Burn layer)>Dodge to lighten the rocks a little further and to bring out some of the green moss> dodge the wharf to bring out a little more detail. Burn with a 100 size brush set at about 70% across the top of the frame to add a little darkness(depth).
And thats about it.
Hope you like it and hope the steps offer some help:D

mongo
31-12-2010, 10:08am
The image lacks a little bit of strong interest point and Mongo is not sure that a lot can e done with it. However, here is a quick try.

Crop off excess horizon and concentrate attention on remaining foreground.

Increase contrast

There are elements of light and colour which can be worked on to make it stand out a little more; particularly the pier on the left.

Selectively add saturation (not too much as it will look false). Selectively highlight some of the areas in the water ( the area from the sun to foreground, along the front of the pier and some of the moss on the rocks). Graduate darkening of the sky from the horizon to the top of frame. Add vignetting ( a lot of people hate vignetting but Mongo thinks it has its place now and then) to top of image only. Other very minor bits and pieces but this is the bulk.

OZAmateur
31-12-2010, 10:14am
WhoDo - i would never have thought to do a portrait crop of this shot (i really wanted a jetty and sunrise together) but i like what you have done and keep scrolling back up to have another look. With your crop is there a way to give a really defined colour graduation from the empty blue sky down to the orange horizon? A sort of blue fading down to orange?

dbax - your edit is much more along the lines of what i was looking to do and i think the crop has made such a huge difference. I almost feel dejected after spending probably 5min (felt like an hour) trying to compose this shot so i wouldnt have to do a crop lol. (i took about 20 photos as the sun rose and tried to capture the boats flying past and also the birds)(strange fact - all the birds were flying from right to left, all the boats were traveling left to right?!?!?)

I'm going to try and have a go at both edits and see how i go...i'll probably have a thousand questions about the grad layers and light layers.

Thank you both for the effort you have given. i honestly just expected a hyperlink to some pages.

OZAmateur
31-12-2010, 10:18am
The image lacks a little bit of strong interest point and Mongo is not sure that a lot can e done with it.

More details please


Selectively add saturation (not too much as it will look false). Selectively highlight some of the areas in the water ( the area from the sun to foreground, along the front of the pier and some of the moss on the rocks). Graduate darkening of the sky from the horizon to the top of frame. Add vignetting ( a lot of people hate vignetting but Mongo thinks it has its place now and then) to top of image only. Other very minor bits and pieces but this is the bulk.

When you say selectively what do you mean? are you using a layer and specifically targeting an area or are you just editing the whole shot?

hus
31-12-2010, 10:37am
Here is my quick attempt for this pic.

mongo
31-12-2010, 10:42am
When we say it does not have a “strong point of interest” we mean that there is no obvious feature or thing which is the subject of the image – there is no single strong feature that stand out which led you to take the picture. Mongo suspects that in this case it was the sunset. However, unless that is a strong enough feature to carry our interest in the image, wherever possible, we try to marry that up with some other related and complimentary feature to “carry “ the image. This is not always possible. For example, some sunsets are carried by amazing cloud structure which are lit up by the sunset and do not need anything else to capture and hold our interest in the image. Mongo has included a sample image of what he thinks might be an example of this.

When Mongo says “selective”, he means just that – i.e the effects are not applied to the whole image but just to some select portions. There are many ways of doing this but layers is the one most commonly used and convenient . Layers was used in Mongo’s edit of your image. Create a duplicate layer of the image ( ie the image with a copy of the image on top of it), apply the changes to the bottom layer and selectively remove portions of the top layer to reveal portions of the bottom image which has the effects you wanted to bring out as part of you top image and them merge them together when you are happy with the look of it.

You can use multiple years to do this – each with its own effect that you wish to introducing into your image OR you can do it 2 layers at a time merge them when the effect has been applied and then start again ie duplicate that layer and apply a separate extra effect, blend that in and merge those layers and so on until you have the finished product.

fillum
31-12-2010, 10:54am
If you get the chance OZ it might be worth re-shooting this location when there is some cloud cover about. My attempt was similar to others, but I pushed the colour a bit further as there is not much happening in the sky.


64952


1. I created a layer mask using Filter / Adjustments / Threshold to separate the water and sky from the jetty and rocks

2. Applied a Multiply layer (at 100%) to the water + sky part of the image to boost saturation

3. Applied Lighten Shadows to the rocks + jetty part of the image to bring a bit more detail to the shadow areas

4. Straigthened horizon and a bit of sharpening


Edit: ...and cropped, obviously :)

Cheers.

WhoDo
31-12-2010, 12:36pm
WhoDo - i would never have thought to do a portrait crop of this shot (i really wanted a jetty and sunrise together) but i like what you have done and keep scrolling back up to have another look. With your crop is there a way to give a really defined colour graduation from the empty blue sky down to the orange horizon? A sort of blue fading down to orange?
I only went for the portrait crop because I thought there was too much distance between the wharf and the sunset for them to be complimentary; I felt they competed for attention. That said I do like what dbax and mongo have done because in cropping to thirds they have forced the eye from the wharf along the horizon to the sun as an articulated leading line, successfully tying the two together.

To apply a colour fade as you asked I would use a software Graduated Filter and change the colour of the grad to the darkest blue at the top. That will then multiply at the top and fade down into the orange of the sunset at the horizon. I hope that's what you're looking for.

Cheers. :beer_mug:

Clubmanmc
31-12-2010, 1:39pm
hey

here is my go...

happy to send you my PSD if you want to see what i did

lightend the lower section

darkened the upper section (both with levels) and blended them together a little

added some clouds and made the sunset a little better,
given the image a slightly bluish tinge to make it more realistic, and yeah i think the reds are too far gone in the above examples...

PM me your email address if you want the PSD... but it is largish

M

OZAmateur
01-01-2011, 9:19pm
Ok, so here is my attempt at fixing up the photo.
Ive done 2, one of the crop just above the pier, and the other non crop.
i had a play with grad filter in raw editor and like how i could select how far down i wanted the filter to work, but couldnt do the same once i opened the photo for further editing. ill have a look at some online tutes.
i also had a bit of a play with selected layer adjustment (another first) lightening up the rocks and pier. the cropped photo had a dodge and burn (dodged to rocks and water burn to sky)(another first)

what do you guys think?

http://farm6.static.flickr.com/5245/5312014566_e4b31b7043_b.jpg (http://www.flickr.com/photos/50551449@N02/5312014566/)
Sunrise from scout pier (http://www.flickr.com/photos/50551449@N02/5312014566/) by PsychoPuppie (http://www.flickr.com/people/50551449@N02/), on Flickr

http://farm6.static.flickr.com/5286/5311424127_fe80543268_b.jpg (http://www.flickr.com/photos/50551449@N02/5311424127/)
Sunrise from scout pier crop (http://www.flickr.com/photos/50551449@N02/5311424127/) by PsychoPuppie (http://www.flickr.com/people/50551449@N02/), on Flickr

WhoDo
01-01-2011, 9:35pm
I think the cropped, almost pano, version works better OZ. I also think your reworked versions are "soft"; i.e. they need some sharpening. Try a high pass filter sharpen at about strength 7.0 and follow with an edge mask sharpen with amount 0.5 and radius 1.0 to start. Neither of these are strong enough cause any glaring artefacts but you should still see some visible improvement in overall clarity. I hope that helps. :th3:

BTW, in both versions you can see visible halos where you've attempted to lighten the distant shore line, in behind the wharf on the left, and the front support of the wharf. You will find a routine work flow that suits you and this stuff will get better over time. Keep trying different things and don't get discouraged if you have to start again from scratch. Once you have settled your work flow it will all happen much more quickly.

dulvariprestige
04-01-2011, 12:24am
This is my attempt in lightroom,
I ran a grad filter on the sky, added some blue in the filter, took the filters saturation down a touch, this managed to get a bit more blue in the sky, but lost a little bit of orange,
then added a little fill light,and global contrast, saturation and sharpness.

Not sure if this would make a difference, but if you do shoot it again, maybe try a bit more of an angle to the jetty so you see more of it.

http://farm6.static.flickr.com/5002/5319500591_f2b2cac81e_b.jpg

davidd
04-01-2011, 1:05pm
Hi

this is my attempt using Nikon's Capture NX2.

1. Cropped to rule of thirds
2. Applied Nik Color Efex Glamor Glow filter.
3. Applied Nik Tonal Contrast filter.
4. A little High Pass sharpening.

65216

reaction
04-01-2011, 10:04pm
I see a lot of rule of thirds examples. Personally I would take EV down a bit, and crop top/bottom with horizon in/near the middle.
the sky's not so great, but I don't like too much of the bottom either...

Ian Brewster
04-01-2011, 10:41pm
And my effort, from one with pretty basic Photoshop CS4 skills:

1. Duplicated Background Layer to which I added a layer mask
2. Inverted the Layer Mask with Control I to make it black
3. Selected the mask then selected the area above the horizon and filled it with White, (all this to have a non-destructive method)
4. Using the Curves adjustment layer, I pulled the curve down in the highlight area of the histogram on the RHS to darken the sky and lift the sunset
5. Shift+Control+Alt +E to get a Stamp Visible layer
6. Dodged over the shadows of the rocks at 11% exposure and part of the pier to lighten these areas
7. Unsharp mask at 85, radius 1.0, threshold at 3

65254

gtpete
07-01-2011, 2:49pm
the crop version looks fine but i think the sky is a little over exposed.