PDA

View Full Version : EVF and LCD Screen only working in Video Mode, can't see anything in Camera Mode



Geoff79
23-04-2023, 2:37pm
Hi all,

Bit of a last call for help here, knowing there are some of the best photographic minds I have encountered on this forum.

Here's a quick rundown-

Yesterday I had my Canon EOS R set up on a tripod and through my own stupidity, managed to knock it over and it fell onto rocks and a shallow stream. For better or worse, this was not the worst fall this camera has had, nor was it anywhere near as wet as it's been before.

There was no physical damage to the camera or lens, however, when I turn the camera on now the LCD screen flashes for half a second before it goes black, and I can see nothing. The EVF hasn't worked for even a split second since the fall. Otherwise, the camera still works and takes photos in the Modes that I can see on the top screen. So I can still take photos, but I can't see what I am taking photos of, nor can I choose a focal point etc.

I took the camera into a camera shop today and they actually got the video function working. So, using the top screen, I can change the Mode to video by pressing the Mode & Info button, and amazingly, video works fine (jeez I wish it was the other way round!!). But when I click back to Camera Mode, LCD and viewfinder are both blank.

I know I have to send the camera in for repairs, but I am going away to Broughton Island with my brothers this coming weekend and am a tad devastated that it looks like I'm not going to be able to bring this camera long.

Just wondering if anyone out there might have some cheeky little nugget of info that might offer up any kind of solution, even if temporary, just to get the camera working for the weekend.

Even a Hard factory reset for the EOS R? Does anyone know how to do it, as it seems very hard to find info on how to do it.

Thanks in advance for any help at all.

ameerat42
23-04-2023, 4:56pm
Nothing toward, Geoff, unfortunately. I found a result somewhat similar to yours, involving water,
and the upshot was not a quick fix:
https://community.usa.canon.com/t5/EOS-DSLR-Mirrorless-Cameras/Canon-EOS-R-Screen-Fault/td-p/282716

Another Canon R display thread:
https://www.reddit.com/r/canon/comments/vvvg9t/canon_eos_r_lcd_screen_is_completely_black_but/

Oh, and check this one out about turning off the eye sensor:
https://www.diyvideostudio.com/eos-r-turn-off-eye-sensor/

For factory reset (drasticus drasticorum, IMO :eek: ) is this it?:
https://hk.canon/en/support/8202600700


:confused013

Geoff79
23-04-2023, 8:14pm
Nothing toward, Geoff, unfortunately. I found a result somewhat similar to yours, involving water,
and the upshot was not a quick fix:
https://community.usa.canon.com/t5/EOS-DSLR-Mirrorless-Cameras/Canon-EOS-R-Screen-Fault/td-p/282716

Another Canon R display thread:
https://www.reddit.com/r/canon/comments/vvvg9t/canon_eos_r_lcd_screen_is_completely_black_but/

Oh, and check this one out about turning off the eye sensor:
https://www.diyvideostudio.com/eos-r-turn-off-eye-sensor/

For factory reset (drasticus drasticorum, IMO :eek: ) is this it?:
https://hk.canon/en/support/8202600700


:confused013

Thanks Am, appreciate the links.

That first link is exactly what's happening with mine. Sounds like two people had the exact same issue, both seemingly due to use in wet weather. Which just amazes me, considering what this camera and I have been through, and by comparison, in terms of water exposure, how "minor" this incident seemed. So strange. Just wish it had happened any of those other times, and not the time when I need it the most. :(

Anyway, thanks again. As suspected, looks like only solution is a slow solution. Hopefully not as expensive as I feared, but that is 4 years ago now.