PDA

View Full Version : Wireless or timer cables remote for canon 60d?



Ragsy
04-03-2014, 7:36pm
Hi All

I am interested in purchasing a Wireless remote for my canon 60d, wondering which one would be the best or most suitable for long exposures on landscapes! I was thinking the Giga T pro II from hahnel but unsure weather its a good pick or not??

Can someone help me out please, what experiences have you guys had with shutter release controls?

Thanks All in advance

Ragsy

- - - Updated - - -

That is suppose to say cable in the title lmao!!

ricktas
04-03-2014, 9:07pm
have a look at our site advertisers: hypop phottix and protog.

Mark L
05-03-2014, 9:41pm
Others may know better and can answer this. Please let me know if I'm missing something.
For long exposures on landscapes, what's wrong with self timer and live view (to stop potential camera shake at start of exposure)?
I do have a cable release. It, used with live view also works fine.
Unless you want you in the photo, is there a need for wireless?

aussieray
05-03-2014, 9:55pm
I use a remote with cable with my 60D, enabling me to program all sorts of variations. Timer, incremental multiple exposures, (in Bulb mode) I can hold shutter open manually with the timer on remote telling me duration, also in Bulb mode enables exposures greater than 30 seconds on 60D etc. This was a non genuine Chinese import ebay special for like $15 that opens up a whole new world of creative photography that 60D can't do without a remote.
If you want wireless, I ask same question as Mark L.

Roosta
06-03-2014, 4:03pm
Hi Ragsy,

See here (http://www.ausphotography.net.au/forum/showthread.php?121308-Canon-Remote-Control)

I purchased the one I've mentioned in that thread, also allows for off camera flash and so on, but wanted it mainly for timed release for stacking shots, will allow you to do almost anything.

ROA44
06-03-2014, 4:16pm
Just seen this post I have the Giga T Pro had I known earlier you could have borrowed it. Due to circumstances I've hardly had time to try it out s let me know how you go.

Ragsy
06-03-2014, 5:13pm
Others may know better and can answer this. Please let me know if I'm missing something.
For long exposures on landscapes, what's wrong with self timer and live view (to stop potential camera shake at start of exposure)?
I do have a cable release. It, used with live view also works fine.
Unless you want you in the photo, is there a need for wireless?

Hi mark thanks for your reply!

I would prefer wireless as i have been climbing over rocks at Merino cliff face whilst having my Tablet plugged into my camera, its a bit to easy to drop and the wireless would allow me to not have to worry about moving to far away from the camera so i don't pull it over! if that makes sense!

And, Yes the self timer either 2 sec or 10 sec is helpful but im planning on purchasing a ND 8 solid filter for my Cokin z series pro kit and i believe that longer exposures than 30 secs may be required. which means the camera to be on bulb mode with a remote timer!!

Ragsy

phild
03-05-2014, 8:52pm
I use a Pixel TW-282 wireless timer remote, for astrophotography works perfectly. Available on ebay. http://www.pixelhk.com/Proshow.aspx?id=299 the range is fantastic, I believe the main unit will trigger multiple receivers although I don't think it's possible to buy the receivers as a single item. The transmitter can also be manually connected to the camera with an optional cord.

ooooops0
04-05-2014, 3:31pm
I use the same, and works great for the price.


I use a Pixel TW-282 wireless timer remote, for astrophotography works perfectly. Available on ebay. http://www.pixelhk.com/Proshow.aspx?id=299 the range is fantastic, I believe the main unit will trigger multiple receivers although I don't think it's possible to buy the receivers as a single item. The transmitter can also be manually connected to the camera with an optional cord.

Sargimuss
10-05-2014, 11:29pm
Hi Ragsy. Not sure if you've got this sorted yet or not, but I have a standard Canon RC6 that I use for bulb exposures. Simple to use purely for the shutter release, push to open shutter, push again to close shutter. On our 600D and 700D, there's a timer displayed on the screen so you know how long the exposure is taking. I had a practise run with a 30 min exposure for a star trail and it worked just fine.

bushbikie
23-05-2014, 12:02am
Wireless=power=battery=flat at some stage (usually when the light is just right NOW!).

I use a wired remote Intervalometer - yes, it does have a battery for all the whizz-bang timing stuff, but the shutter release does not rely on the battery to trigger the shutter, and it can be locked on for the longer exposures.

Bennymiata
28-05-2014, 6:00pm
I'm with Bushbikie on this one.
I have the Hanel giga Pro II, and it works really well, when the batteries aren't flat.
The one in the Tx is the real culprit as it uses a small disk battery that has little charge and runs out often.
I know manufacturers want to make these things small, but I would be willing to have a larger Tx on the top of my camera, than being forced to carry 2 or 3 expensive little batteries around with me all the time, when I have a hundred or so AA and AAA sized rechargeables.
I do a bit of tripod work, but I use a wired remote as it just always works.............
The cheap Chinese ones work really well too.

AUXRVIII
10-06-2014, 8:21pm
I have the Hahnel Giga T Pro II, I did have a cable remote before moving to the wireless. One thing I always keep in mind when making a purchase is how will I be restricted by my equipment if I start doing a new style of photography or change my processes etc. For the price and quality of the product, I think it's great value too. Batteries do last a very long time, I've had my 18mths and still haven't changed them.
I chose the wireless because I felt if gave me more flexibilty with my camera. Long exposure selfies was a fun experiment where I was 10 meters from the camera. Light painting was also another time it was useful. Using the timer is ok, but I'm forgetful and have left the timer on and missed a few shots.

phild
27-07-2014, 10:25am
Regarding the flat battery scenario, I've had no issues with batteries in the Pixel wireless remote, I do carry spares but have yet to need them. Last year I used the pixel wireless remote over 9 very long nights at Queensland Astrofest with 100% reliability and zero battery changes. Most exposures were in the 5-10 minute range so the remote was running almost constantly and in the case of the receiver operating at temperatures as low as zero degrees C, often at ranges of over 40 metres.

The receiver on the Pixel TW-282 uses a CR-2 lithium battery and is rated for (standby time) 400 hours use, the transmitter uses 2x AAA's and is rated at "Standby time more than 4 years" according to the manual. What that means in real terms I'm not sure but my units are still functioning on the original batteries after 12 months standby and around 70 odd hours continual use. Both units have low battery icons on the LCD displays.

GoldZilla
03-08-2014, 4:38am
I've got the Hahnel Giga T Pro 2 as well, and the beauty of it is that you can use it as a wired remote OR a wireless remote with the 60D. If you're going to be more than arm's length away from the camera, then all you need is a longer cable to plug between the remote and the camera - you don't need to have the receiver in the hot shoe.

I've also "installed" Magic Lantern on some of my memory cards, and although I haven't used it much yet, I do believe there might be a timer and bulb function built-in. If I'm wrong, I'm sure someone will correct me. :D

Jizzy
03-08-2014, 9:17pm
I use a Pixel TW-282 wireless timer remote Available on ebay.


I can only recommend that remote as well! Works like a charm!