PDA

View Full Version : Looking for Canon 24-105 L IS USM owners with problems.



vk2gwk
15-05-2012, 8:59am
Recently my 24-105mm L lens started showing the
"aperture" problem - Err 01 - no communication between lens and body. Most
likely because an aperture blade got stuck or the ribbon cable serving the aperture mechanism got dislodged/damaged.

This seems to be a fairly common problem with this lens and requires expensive repairs ($350 - $650).
Although I read quite a few reports here and there about this problem Canon seems to ignore it and pretends it "does not exist". IMHO this must be a design fault or inherent weakness which they should recognise and take resposibility for - especially as this lens has the "L" label for "professional" use.

I would like to make an inventory of all complaints and with this inventory build a case against Canon. Here in Australia I could report the case to the ACCC (Australian Competition and Consumer Commission).

Please report your personal experience in this thread or send me a PM with details.

__________________

William
15-05-2012, 9:31am
Should be plenty of info on this thread which I started last July , I got mine repaired and was told it should'nt happen again (Touch wood :)) Been working perfectly since the $300 repair , It's most likely the ribbon attached to the aperture mechanism, But you cant just replace the ribbon sadely , Anyway have a read here, Should be useful to you - Bill

http://www.ausphotography.net.au/forum/showthread.php?87512-quot-My-24-105-f4-L-Died