User Tag List

Thanks useful information Thanks useful information:  3
Page 1 of 2 12 LastLast
Results 1 to 20 of 35

Thread: Strobe beginners question

  1. #1
    Member hus's Avatar
    Join Date
    27 Dec 2009
    Location
    Sydney
    Posts
    313
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Strobe beginners question

    Out of boredom I was scanning ebay and ended up buying a flash trigger and 2 recievers.
    If l set up a triangle setup where the flash on the left and right and the subject in front.
    My question is would the camera do the metering on its own when l take a shot (shutter on flash sync speed) or do l need a light meter to manually work out the settings.

    I really should keep away from ebay
    The fastest way to a man's heart is through his chest with a sharp knife
    Canon 50D,
    Tamron 70-200 f/2.8, A very bright light, EF 50 f1.8, Tamron 17-50 f2.8

  2. #2
    Moderately Underexposed
    Join Date
    04 May 2007
    Location
    Marlo, Far East Gippsland
    Posts
    4,902
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)
    Unless the trigger and receivers you bought from ebay support wireless ttl metering in conjunction with your flash heads and camera you will need to buy a meter and go down the full manual route. Either that or experiment with lots and lots of shots and get the metering right via the camera lcd and histogram.
    Buying a meter and working fully manual isn't as daunting ( just more expense ) as it sounds and also avoids the inconsistent results that ttl can sometimes bring.
    Andrew
    Nikon, Fuji, Nikkor, Sigma, Tamron, Tokina and too many other bits and pieces to list.



  3. #3
    Member
    Join Date
    28 Apr 2008
    Location
    Bathurst
    Posts
    818
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by hus View Post
    Out of boredom I was scanning ebay and ended up buying a flash trigger and 2 recievers.
    If l set up a triangle setup where the flash on the left and right and the subject in front.
    My question is would the camera do the metering on its own when l take a shot (shutter on flash sync speed) or do l need a light meter to manually work out the settings.

    I really should keep away from ebay
    Unless the Trigger and receiver are Ettl compatible (which i doubt as they are from ebay ), you are going to have to set up the flashes manually...

    http://www.strobist.blogspot.com/ is a great resource.. I am only new to this world of off camera lighting as well, and have learn't a ton from there

    EDIT: Beaten by Andrew... :P
    Cheers, Brad




  4. #4
    Member
    Threadstarter
    hus's Avatar
    Join Date
    27 Dec 2009
    Location
    Sydney
    Posts
    313
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Thanks guys looks like l have opened a can of worms for myself, more learning to do and another purchase involving a light meter.

  5. #5
    Member
    Join Date
    12 Feb 2008
    Location
    Brisbane
    Posts
    7,830
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Strobe beginners question

    Lol, probably

    Just a tip, just start with one very simple light just off camera axis and go from there


    Sent from my iPhone using Tapatalk
    Darren
    Gear : Nikon Goodness
    Website : http://www.peakactionimages.com
    Please support Precious Hearts
    Constructive Critique of my images always appreciated

  6. #6
    Member
    Threadstarter
    hus's Avatar
    Join Date
    27 Dec 2009
    Location
    Sydney
    Posts
    313
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Thanks again but expect more questions about light meters next ;-)

  7. #7
    Member
    Threadstarter
    hus's Avatar
    Join Date
    27 Dec 2009
    Location
    Sydney
    Posts
    313
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Wise advice, I better take small steps from now on but expect questions about light meters once I am geared up

  8. #8
    Member
    Join Date
    12 Feb 2008
    Location
    Brisbane
    Posts
    7,830
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Strobe beginners question

    Quote Originally Posted by hus
    Thanks again but expect more questions about light meters next ;-)
    You should not need a light meter to start with


    Sent from my iPhone using Tapatalk

  9. #9
    Member
    Join Date
    24 Jun 2009
    Location
    Northern Beaches, Sydney
    Posts
    2,338
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by kiwi View Post
    You should not need a light meter to start with
    Or at any point I would argue - it is digital after all, so test shots and your histogram become your light meter.

  10. #10
    Member
    Join Date
    12 Feb 2008
    Location
    Brisbane
    Posts
    7,830
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Id disagree with that a little, I do find one handy when you are working with multiple lights and ratios in a studio setting

  11. #11
    Member
    Join Date
    10 Aug 2006
    Location
    Rockhampton
    Posts
    392
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I've been working without a light meter, granted my shots have not been of people yet. But it only takes a few shots to get the exposures right.

    Just get yourself a process, think through the shot. The most important thing imo to think about is what do you want to happen with ambient. Underexposed? Completely Black - or balanced.

    Once you have that you can usually work out the rest with trial and error.

  12. #12
    Member
    Threadstarter
    hus's Avatar
    Join Date
    27 Dec 2009
    Location
    Sydney
    Posts
    313
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by maccaroneski View Post
    it is digital after all, so test shots and your histogram become your light meter.
    Just recently I have switched on histogram view on my shots so it seems I am on the right track, only once did l get tricked into thinking my shots were coming out fine when I wasn't using flash during an indoor sports shoot only to fine them all underexposed once I downloaded them to the computer. If l knew about histograms back then it could have been avoided, but better late than never

  13. #13
    Account Closed
    Join Date
    25 Oct 2009
    Location
    Melbourne
    Posts
    59
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by hus View Post
    Just recently I have switched on histogram view on my shots so it seems I am on the right track, only once did l get tricked into thinking my shots were coming out fine when I wasn't using flash during an indoor sports shoot only to fine them all underexposed once I downloaded them to the computer. If l knew about histograms back then it could have been avoided, but better late than never
    Never trust the LCD on the back, but I have found that if I turn the brightness setting right down, it gets much closer to how it should be.

  14. #14
    Member
    Join Date
    24 Jun 2009
    Location
    Northern Beaches, Sydney
    Posts
    2,338
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by kiwi View Post
    Id disagree with that a little, I do find one handy when you are working with multiple lights and ratios in a studio setting
    I think just like the flash itself, I will argue against them until I know how to use one

  15. #15
    Member
    Join Date
    07 Aug 2007
    Location
    Newcastle, NSW
    Posts
    321
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by maccaroneski View Post
    I think just like the flash itself, I will argue against them until I know how to use one
    In a multi light studio situation it's not unusual to meter the main light(s) at say f/8 Hair light at f/5.6 and ascent lights at f/11. A light meter is pretty much the only way to achieve this without significant stuffing around.

  16. #16
    Member
    Threadstarter
    hus's Avatar
    Join Date
    27 Dec 2009
    Location
    Sydney
    Posts
    313
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by JazzXP View Post
    Never trust the LCD on the back, but I have found that if I turn the brightness setting right down, it gets much closer to how it should be.
    I tried this but found I always turned it up

  17. #17
    Member
    Threadstarter
    hus's Avatar
    Join Date
    27 Dec 2009
    Location
    Sydney
    Posts
    313
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Back again and today got the el-cheapo triggers to play with, as advised early on the thread I went all manual and used the histogram as a light meter, after 3 test shots looks like I pretty much nailed how to get it right ( in my opinion ) the flashes were just placed randomly (one on the floor and other on the couch) and on one shot I bounced the main flash. The flash units I used were Canon 390ex and a sigma st430.
    Looks like I can save the money and use it on other things rather than a light meter.
    The pictures are as it came out of the camera no processing other than resize, how do they look ?






  18. #18
    Member nexus's Avatar
    Join Date
    31 Aug 2009
    Location
    Sydney
    Posts
    59
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by hus View Post
    Back again and today got the el-cheapo triggers to play with, as advised early on the thread I went all manual and used the histogram as a light meter, after 3 test shots looks like I pretty much nailed how to get it right ( in my opinion ) the flashes were just placed randomly (one on the floor and other on the couch) and on one shot I bounced the main flash. The flash units I used were Canon 390ex and a sigma st430.
    Looks like I can save the money and use it on other things rather than a light meter.
    The pictures are as it came out of the camera no processing other than resize, how do they look ?
    Usually hard light with the associated hard shadows is quite hard (no pun intended) to get right IMHO. Perhaps trying to position your lights to soften the shadows around him especially in the 2nd shot.
    Canon EOS 50D w/ Phottix BP-40 Grip | 17-40 f/4L | 24-70 f/2.8L | 70-200mm f/2.8L IS | 430EX II | YN560 | Cactus V5 | Benro C-257EX + B2 Ballhead
    http://picasaweb.google.com/derfel/

  19. #19
    Member
    Join Date
    13 Mar 2008
    Location
    Brisbane
    Posts
    686
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I haven't played with my flash a lot. But you might want to try pointing those flash heads at the roof and bouncing the light down. Instead of pointing the flash directly at the subject.

    This way you'll get less harsh lighting and strong shadows and get more "fill" light rather than direct, front on light.
    Michael.

    Camera: Canon EOS 400D w/ Battery Grip (BG-E3)
    Lenses: Sigma 10-20, Sigma 24-70, Canon 50 f/1.8 & Sigma 70-200
    Software: Adobe Photoshop Lightroom 1.4 and Photoshop CS3
    Photos: http://www.flickr.com/photos/mrjorge/

  20. #20
    Member
    Threadstarter
    hus's Avatar
    Join Date
    27 Dec 2009
    Location
    Sydney
    Posts
    313
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Cool will give that a go

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •