could someone explain how how AF adjustment, option 36 in custom settings, on the k7 works? please
could someone explain how how AF adjustment, option 36 in custom settings, on the k7 works? please
cc and enjoy
Photography is painting with light
K1, Pentax 18-250mm zoom, Pentax 100mm macro, Sigma 50-500mm, Pentax 28-105mm
Velbon Sherpa tripod Photoshop CS6
I hope is the same option, but after the last couple of firmware updates it becomes option 37
But anyway, it adjust of the focal point, fowards/backwards (I gues you may already know that), see page 121 of the manual.
When you enter the menu you get 1. Off 2. On, select 2 and then arrow left or right will enter the setting page.
then you can make your adjustment to either to 'all' your lenses or just the one currently attached (at that given time, it rembers the setting for each individual (up to 20 lens types)).
make your adjustment then press set to save, menu to exit.
I hope this helps.
Br Barry
Flickr
[SIGPIC][/SIGPIC] + 18-55WR + 50-200WR + Sigma 17-70 F2.8-4.5 DC Macro
Sigma APO 70-200 f2.8 EX DG OS HSM + Sigma EF-610 DG Super Flash
do a search for LensAlign MkII before you try to play with that setting!
I find that the focus charts are helpful as a start, bu then go out and try on a variety of subject matter at both close and mid distance from camera, maybe 1mt to 5-8mts. As far as I can recall, Pentax use the "+" for back focus and "-" front focus, ie you have to add or use + to get the focus forward for back focus issues, and reduce or use - to push the focus back for front focus issues.
Also, you may find that with a zoom, say a 50-135, the focus my be good at say 135mm, but be back or front focused slightly at 50mm, or visa versa. Don't be disheartened as it is rare that all are 100% perfect. Most get the AF to be right at the long end and not so much at the wider end as it can be more obvious at the long end.
My PBase site: http://www.pbase.com/lance_b
My Flickr site: https://www.flickr.com/photos/35949907@N02/
yeh with a zoom 50-135, it's said to test at tele eg 135mm where DOF is narrowest and errors most obvious.
whatever you do it'll never be 100% due to tolerances tho