User Tag List

Thanks useful information Thanks useful information:  1
Results 1 to 15 of 15

Thread: why does the manual suggest turning off the antishake option when using a tripod?

  1. #1
    Member Cogentia's Avatar
    Join Date
    19 Dec 2009
    Location
    Brisbane
    Posts
    2
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    why does the manual suggest turning off the antishake option when using a tripod?

    I have just purchased a KX and have have been trying out an old Pentax 400mm screw thread lens that is 35 years old. It works well but I am surprised that the KX manual recommends turning off the anti-shake option when using a tripod. What is the problem with using anti-shake and a tripod?

  2. #2
    can't remember
    Join Date
    16 Apr 2007
    Location
    Huon Valley
    Posts
    4,165
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)
    Hi Cogentia,

    Unless the stabilisation system includes a tripod-detection mechanism like the Canon and Nikon optical (in-lens) systems, when you mount it on a tripod it tries to compensate for movements that are not there, and ends up making matters worse.

  3. #3
    Member
    Join Date
    06 Jun 2009
    Location
    Sunshine Coast
    Posts
    219
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Cogentia. In layman's terms. The cameras anti shake system is searching for vibrations associated with movement, be it hand held of mirror slap. This searching action by the camera cause ultra sonic vibrations that cause movement even when on a tripod, which can cause motion blur in your photo. Hence the advice to turn it off on a tripod. Catch 22, Causes movement while looking for non existent movement. Hope this didn't make it muddier.

    Mick.G.

  4. #4
    Member
    Threadstarter
    Cogentia's Avatar
    Join Date
    19 Dec 2009
    Location
    Brisbane
    Posts
    2
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Thanks for advice

    Thanks for the responses. It is ironic that the main reason I purchased the Kx was because it's anti-shake mechanism was in in the camera body and so I could use it with my old 400mm Pentax telephoto. Of course this lens is too long for hand held use so I will always use a tripod and therefore turn off the anti-shake. Oh well just as welll I really like the KX and the 55-300 and 100mm Macro lenses I bought with it.

  5. #5
    can't remember
    Join Date
    16 Apr 2007
    Location
    Huon Valley
    Posts
    4,165
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)
    400mm too long for hand-held? Not a bit of it, Cogentia.

    Given good light and image stabilisation, you can successfully hand-hold a much longer lens than that. In-body anti-shake isn't as effective as in-lens stabilisation with the longer lenses, but I'd be absolutely astonished to discover that the Pentax stabilisation wasn't still doing useful work at and beyond 400mm.

    Naturally you need to use good long-lens technique, but that is always true, no matter what equipment you have or how it's mounted.

    Nope: experiment with hand-holding your 400. Heck, I sometimes hand-hold my 500/4 with a 2X converter on it (= 1000mm total), though not for long and not often. You can hand-hold an unstabilised 400mm lens (with difficulty), never mind one on a body wit AS. Go for it!

  6. #6
    It's all about the Light!
    Tech Admin
    Kym's Avatar
    Join Date
    15 Jun 2008
    Location
    Modbury, Adelaide
    Posts
    9,632
    Mentioned
    23 Post(s)
    Tagged
    0 Thread(s)
    I use my SR on a tripod (with the 500) and it works.

    The main reason it is discouraged is that it *may* hunt when on a stable platform; especially body mounted tripod.

    But... with a long lens, the tripod mount is on the lens and not the body, so there is some movement at the sensor.

    Diagram... (Picture here http://www.ausphotography.net.au/for...081#post261081)

    [B][LLLLLLL]
    ____^

    B = Body
    L = Lens
    ^ = Tripod mount

    So there is slight angular movement possible at the body in the above setup.

    C&N users have IS/VR in some lenses and that is a different story. They also say (sometimes) don't use IS/VR with a tripod.
    Pentax have body based SR which means every lens is stabilised.

    Edit: I've used the 50-500 @500 handheld with good results.

    Edit 2: 500mm hand held: http://www.ausphotography.net.au/for...ad.php?t=27129
    regards, Kym Gallery Honest & Direct Constructive Critique Appreciated! ©
    Digital & film, Bits of glass covering 10mm to 500mm, and other stuff



  7. #7
    It's all about the Light!
    Tech Admin
    Kym's Avatar
    Join Date
    15 Jun 2008
    Location
    Modbury, Adelaide
    Posts
    9,632
    Mentioned
    23 Post(s)
    Tagged
    0 Thread(s)

  8. #8
    Account Closed HansPeter's Avatar
    Join Date
    04 Jan 2010
    Location
    Collie River Vally
    Posts
    99
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Using a tripod!! Can you do damage to your lens if you forget to turn of the stabilisation system??

  9. #9
    Amor fati! ving's Avatar
    Join Date
    28 Jun 2007
    Location
    St Helens Park
    Posts
    7,283
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    no, but it doesnt do anything for the picture... infact it may wreck teh picture.

  10. #10
    Amor fati! ving's Avatar
    Join Date
    28 Jun 2007
    Location
    St Helens Park
    Posts
    7,283
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    as for hand holding 400mm, with stabilisation it should be easy enough. I hand hold 500mm

  11. #11
    Go the Rabbitohs mudman's Avatar
    Join Date
    23 Oct 2008
    Location
    Canberra
    Posts
    3,808
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by landteacher View Post
    Cogentia. In layman's terms. The cameras anti shake system is searching for vibrations associated with movement, be it hand held of mirror slap. This searching action by the camera cause ultra sonic vibrations that cause movement even when on a tripod, which can cause motion blur in your photo. Hence the advice to turn it off on a tripod. Catch 22, Causes movement while looking for non existent movement. Hope this didn't make it muddier.

    Mick.G.
    Isc this why i can't get good sharpness with the K7 when i zoom the 18-250?
    i thought that with anti shake in the body and not the lens that because the body is stable it would not matter.
    cc and enjoy

    Photography is painting with light

    K1, Pentax 18-250mm zoom, Pentax 100mm macro, Sigma 50-500mm, Pentax 28-105mm
    Velbon Sherpa tripod Photoshop CS6

  12. #12
    A royal pain in the bum! arthurking83's Avatar
    Join Date
    04 Jun 2006
    Location
    the worst house, in the best street
    Posts
    8,777
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by mudman View Post
    Isc this why i can't get good sharpness with the K7 when i zoom the 18-250?
    i thought that with anti shake in the body and not the lens that because the body is stable it would not matter.
    Not necesscelery!

    The lens itself may be the culprit in this case.

    Try zooming back a little form the full reach that the lens is capable of.
    use the marked focal lengths at say, 200mm 180mm 135mm... etc and see if that makes a difference too(to sharpness).

    Most of these consumer kit type lenses, especially the superzoom types will be at their worst at the longest marked focal length.

    And be sure to try stopping down by at least one stop from maximum to 2 stops from max aperture too.

    There are too many other variables to consider as well, why a lens is not producing maximum sharpness when it matters most.. such as focus accuracy... tripod quality(when using a tripod that is!) .. etc, etc....
    Nikon D800E, D300, D70s
    {Nikon}; -> 50/1.2 : 500/8 : 105/2.8VR Micro : 180/2.8 ais : 105mm f/1.8 ais : 24mm/2 ais
    {Sigma}; ->10-20/4-5.6 : 50/1.4 : 12-24/4.5-5.6II : 150-600mm|S
    {Tamron}; -> 17-50/2.8 : 28-75/2.8 : 70-200/2.8 : 300/2.8 SP MF : 24-70/2.8VC

    {Yongnuo}; -> YN35/2N : YN50/1.8N


  13. #13
    Account Closed
    Join Date
    03 Jul 2007
    Location
    Brisbane
    Posts
    214
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    i've have my anti shake turned off at all times

  14. #14
    Member
    Join Date
    10 Jun 2010
    Location
    Canberra
    Posts
    11
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I tend to leave the anti-shake on all the time. I'm not convinced there's any problem when shooting off a tripod, or at least I've never seen any evidence of it in my shots.

    Here's a shot of a water dragon that posed nicely for me, and sat still long enough for me to set the tripod and line him up. Camera was K20D with an old Schneider-Kreuznach 360mm telephoto in M42 mount.



    And a 100% crop. I was lucky and managed to just about nail the focus.



    Cheers!
    Chris

  15. #15
    Member JorgD's Avatar
    Join Date
    07 May 2010
    Location
    Brisbane
    Posts
    68
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    That's a seriously crisp lizard photo

    I have had problems with leaving the IS turned on while on a tripod with my 70-200 f4 L IS lens (Canon), and have learned from that bad experience that even though the lens is supposed to detect that it is on a tripod, it is better to turn the IS off to make sure.

    The IS introduced enough movement that at 200 I could see the image move in the viewfinder.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •