 |
  |
 |
Thanks useful information: 0
I was taking a look at zoom lenses after using my friend's 100-400 the other weekend, and noticed that many of them don't have IS. I know the 70-200 2.8 has an IS version (at a significant cost) but a lot of the others don't have an IS version.
I would have thought that IS would be even more important in a lens with a longer focal length.
Is there a reason for not having IS in these lenses? Do you find that it makes shooting difficult without it?
Thanks in advance
Give examples please.
Some Canon lenses are old designs eg the 400mm f5.6 and simply pre-date IS.
In the Canon world, plenty of zooms have IS, and not necessarily telephoto zooms.
The EF 24-105mm f/4L has IS, as does the EF-S 17-55mm f/2.8. There are numerous other lenses.
As for why a lens manufacturer would choose not to include IS in a lens, it basically comes down to quality and cost.
IS increases the optical complexity of a lens. It requires more optical elements, which adds weight, bulk and design considerations, which ultimately translates to cost.
In the case of the EF 70-200mm zooms lenses, there are four varieties.
There is an f/2.8 version and an f/4 version, and also a version of each with IS.
how long are we talking? if the lens is too large to hold...IS is pretty irrelevent.Originally Posted by Fedgrub
Up until about 10 years ago IS/OS/VR (whatever you like to call it) did not exist. Every photo taken before then was done so without it. Can it be a benefit? yes! Is it necessary? No.
If you are using a longer lens, use a tripod or monopod, as has been done for generations. Just cause a lens doesn't have IS doesn't mean it is not a brilliant lens. There are a lot more factors to good photos, than a single feature that a lens may or may not have.
"It is one thing to make a picture of what a person looks like, it is another thing to make a portrait of who they are" - Paul Caponigro
Constructive Critique of my photographs is always appreciated
Nikon, etc!
RICK
My Photography
Actually, IS goes back 17 years.
Canon first introduced IS in 1995 with the introduction of the EF 75-300mm f/4-5.6 IS USM.
Thanks for the info. I was just guessing my dates, based on when they became popular, which would have been the early 2000's
From memory, Canon was the first manufacturer to introduce the technology.
I'm not sure when Nikon and the others first brought out their stabilisation systems, but certainly over the last decade IS has been more prominent and popular, as indeed have DSLRs.
The first IS lens I bought was in 2005.
Threadstarter
This is a good way to put it.
Thanks everyone for the replies. It's more about my shaky hands, I don't have a medical condition or anything but my hands are shakier than normal so I was wondering whether there was a technical reason why IS doesn't come on a lot of lenses, but it seems to be a time thing. Would be nice to get the 70-200 with IS, but it's so damn expensive. Might have to tripod it with the non-IS.
I know what is cheaper but what is heavier to lug? tripod or IS
Cheers Brian.
Canon 7D Kit lenses EFS 18-55 IS EFS 55-250 IS EF28-90 Canon EF 2xll Extender Sigma DG150-500 OS Speedlight 420EX. 580EX
When using "long" lenses there is a limitation on the usuable shutter speed of: T = 1 / focal length . So on a full frame camera and a 400mm telephoto lens you need at least 1/400" (and on a APS-C even 1/640"). This means that already "wide open" you'll have to increase your ISO in low light which can be a disadvantage (noise!). The Image Stabilisation brings this down 2 - 3 stops so that you can shoot at 1/50" - 1/100" (if the subject is stationary) without a worry about camera shake. I tried it out with my 100-400mm lens at 400mm as I am considering a 70-200mm L and wanted to check if I could do without the IS. The test shots showed that the IS really works - even when you think you hold your gear pretty steady! So I am going to save a little bit longer to get the IS version
This isn't a limitation; it's a very general rule-of-thumb to be used as a guideline.
The minimum shutter speed required to ensure a sharp shot depends on a number of factors, such as:
- the available light;
- the focal length of the lens;
- the weight and weight distrbution of the lens;
- whether the subject is moving;
- the lens handling technique of the user;
- whether there's any wind; and
- whether the shooter is on unstable terrain (eg, jetties, boats, etc.).
This is a common misconception to the Rule-of-Thumb Guideline. The focal length of the lens doesn't change just the sensor size. The image projected onto the sensor is the same, jut cropped differently by the sensor size, so the shutter speed requirement doesn't alter.
Keith.
Last edited by Speedway; 29-04-2012 at 2:55pm.
The smaller image circle projected onto an APS-C sensor by a 135-format lens means that the subject matter is larger within the confines of the frame.
This means that movement of subject matter (either that of the subject itself, or photographer-induced) will therefore traverse more of the frame and make blur more apparent, so to compensate you would need to base your minimum shutter speed on the focal length multiplied by 1.6 (Canon), 1.5 (Nikon) or 2.0 (Olympus and some others).
No the image circle is the same for both FF and crop sensor cameras, the camera just puts a smaller sensor in that circle meaning the edges are cropped more, the movement within the actural circle remains the same. In other words the sensor just crops the same image to suit giving the impression of an enlarged image. If you had an object move 100mm then if the movement on the FF sensor was 1mm then the movement on the crop sensor would be the same, 1mm.
Keith.
Personally, I like to have IS on all my lenses.
It is defintely a benefit, and apart from price, is rarely a disadvantage.
Canon are bringing out new 24mm and 28mm prime lenses with IS shortly.
All my photos are taken with recycled pixels.
Knowledge is knowing that a tomato is a fruit.
Wisdom, is knowing not to serve it in a fruit salad.
And yet they didn't put it on the new 24-70 f2.8.
Apart from cost, has anyone got any theories behind Canon's reasoning on this?
Mark
Canon 70D w/Grip l Canon 60D w/Grip l EF 100-400 f4.5-5.6L IS USM l EF 70-200 f4L IS USM l EF-S 15-85 f3.5-5.6 IS USM l EF 100 f2.8 USM Macro l EF-S 18-55 f3.5-5.6 IS STM l EF 50 f1.8 II l Canon EF-S 10-22 f3.5-4.5 USM l 430 EX II Flash l Rode Stereo VideoMic l Manfrotto 055XPROB + 498RC2 Tripod l Benro MP-96 M8 Monopod l Lowepro Vertex 200 AW Backpack l Lowepro Pro Runner 300 AW Backpack l PS CS5 Extended l Lightroom 4.3
The imaging circle is actually a property of the sensor's length and width; specifically, the diameter of the imaging circle is the diagonal dimension of the focal plane (ie, sensor or film).
In actuality the image projected onto the sensor by a full-frame lens is a smaller image than what the lens is able to project.
Moving subject matter will traverse more distance across the APS-C frame.
If subject matter has less distance to move from one edge to the other (which it does when projected onto an APS-C sensor by a 135-format lens), its movement will appear more pronounced, as it will traverse a higher percentage of the available frame space.
1mm out of 22.5mm is a higher percentage (0.044%) than 1mm out of 36mm (0.027%); therefore, the subject matter travels across a larger portion of the frame, meaning that blur will be more apparent.
Last edited by Xenedis; 29-04-2012 at 8:38pm.
Perhaps to avoid cannibalising the market for the 24-105/4L IS.
Posting Permissions
Reply With Quote
Add To Bookmarks
