User Tag List

Thanks useful information Thanks useful information:  0
Results 1 to 7 of 7

Thread: Memory cards

  1. #1
    Ausphotography Regular
    Join Date
    09 May 2008
    Location
    Brightveiw
    Posts
    1,270
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Memory cards

    Is it possible for a memory card to blow your camera ie,just not work anymore
    my memory card went through the wash,i put the memory card in the camera and got nine pics before camera frozen up (batterys fully charged)
    took batterys out and put them back in and nothing happens.
    Put the memory card in the reader on the pc and now i dont even have a drive i.
    its non existant sinse putting the memory card in.

    steve.

  2. #2
    Moderately Underexposed
    Join Date
    04 May 2007
    Location
    Marlo, Far East Gippsland
    Posts
    4,902
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)
    CF or SD Steve?

    I can imagine that a CF card could hold some water in the pin holes and cause a malfunction but you would imagine that an SD card would dry quicker.
    Andrew
    Nikon, Fuji, Nikkor, Sigma, Tamron, Tokina and too many other bits and pieces to list.



  3. #3
    Ausphotography Regular
    Threadstarter

    Join Date
    09 May 2008
    Location
    Brightveiw
    Posts
    1,270
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    im leaning towards it blew the Circuitry in the camera batts have been out half hour and just tried again
    and nothing and the memory card reader on the pc with the card in is saying it has malfunctioned.

    Its a CF card andrew.
    Last edited by stevemack; 25-04-2011 at 6:28pm.

  4. #4
    Member
    Join Date
    10 Jul 2009
    Location
    Brisbane Australia
    Posts
    732
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I'd also say the CF must have had some excess water in it, When you put it into the camera it possibly shorted something on the camera

    On the up site your camera should have no sign of damage so might be fine for a warranty job if required, Have you taken out all the battery's including the one for the time & date ?
    Jason / Brisbane QLD flickr
    Canon 5D Mk II 40D, 17-40mm f/4L, 24-70mm f/2.8L, 70-200mm f/2.8 L IS.

  5. #5
    Ausphotography Regular
    Threadstarter

    Join Date
    09 May 2008
    Location
    Brightveiw
    Posts
    1,270
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Hi jason all batterys have been taken out even the date and time back up battery and its still dead
    i tried the CF card again before in the memory card reader and still didnt work although this time
    the CF card was so hot on one side you could barely hold it.
    I have no warranty on the camera.

  6. #6
    Member
    Join Date
    10 Jul 2009
    Location
    Brisbane Australia
    Posts
    732
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Bummer
    Last edited by accesser; 25-04-2011 at 10:58pm.

  7. #7
    Member
    Join Date
    28 Aug 2008
    Location
    Adelaide
    Posts
    1,905
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    CF card must still be a bit damp in the pin recesses

    I have had a few SD cards go through the washing machine but after drying them its fine on my camera for years to come.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •