Myth: Sensor Dust doesn't move

[wideangle]

I have been looking at some of my photos that show stuff that has landed on the sensor
and contrary to what material I have read about sensor dust on the internet; a) sensor dust
doesn't just appear as 'dust bunnies' (soft out of focus specs) and b) it can move around
from shot to shot.

The photos below have been taken at f8 and with different lenses, and shots
and in each shot the specs appear in differnet areas. Then in many other
shots of sky detail etc there is nothing, wheather shooting at a high or low f stop. So
it seems that sensor dust can move around and can appear as hard defined specs,
not just soft out of focus ones and always in the same spot as posts and articles about
the issue suggest. Unless of course a UFO has landed in this neck of the woods! lol

Here are some samples:

[Kym]

Handy links...
* Changing Lens (dust) http://www.clarkvision.com/photoinfo...anging.lenses/
* Cleaning Digital Cameras - The Methods http://www.cleaningdigitalcameras.com/methods.html
* Dust http://www.cameralabs.com/workshops/...st/page3.shtml

Blower 1st... try a magnifying glass and see if you see anything on the sensor.

[Seesee]

Must say I've not seen sensor dust in a long shape before as are these....maybe not dust but a smear from something, hopefully not scratches.

Some sensor duust moves for sure, but depends on well it adheres to the sensor no doubt.
Generally sensor specs will show up more on images taken of bright subjects and more so at smaller aperatures of f8, f16 or above.

[wideangle]

Must say I've not seen sensor dust in a long shape before as are these....maybe not dust but a smear from something, hopefully not scratches.

I don't reckon it would be scratches on the sensor anyhow as these spots show up in different places in all shots. Would think that if it were scratches then it would be in the same spot.

[davesmith]

I'm not surprised dust moves around. Unless it's physically stuck to the sensor it would have to succumb to the same forces that got it there in the first place, whether it be gravity, suction, static or whatever. It'll still move around.

My sensor moves around as well every time I take a shot, not to mention vibrating every time I turn it on/off, so that adds to it too. Longer specs tend to be hairs. Generally a blower will get rid of it all (or at least blow it into a nook and/or cranny where it might stay out of the way for a while).

[Kym]

I'm not surprised dust moves around. Unless it's physically stuck to the sensor it would have to succumb to the same forces that got it there in the first place, whether it be gravity, suction, static or whatever. It'll still move around.
My sensor moves around as well every time I take a shot, not to mention vibrating every time I turn it on/off, so that adds to it too. Longer specs tend to be hairs. Generally a blower will get rid of it all (or at least blow it into a nook and/or cranny where it might stay out of the way for a while).

Agreed. My K20D innards has a sticky pad below the sensor which is supposed to collect the errant dust etc. The K20D shakes rattles and rolls the sensor on power up. The body is weather sealed so dust is kept to a minimum anyway.