User Tag List

Thanks useful information Thanks useful information:  1
Results 1 to 8 of 8

Thread: Flexitilt

  1. #1
    Member
    Join Date
    29 Jul 2015
    Location
    Greensborough
    Posts
    1,655
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)

    Flexitilt

    I purchased one of these, a few weeks back, and I am putting it through it's paces. It seems to be holding out OK. I thought it might be OK for me, as I take a lot of coins and stamps and the tripod gets in the way. I though it might be a bit flimsy, but it is not, and comes with an Allen key to keep the swivily bits tight. taken with my Samsung mini. Does any one else have one, who can let me know what they think of it..

    20170509_171223aa.jpg

    20170509_171257aa.jpg
    I have been taking photos for 50 years. I am now trying to get into Photography


  2. #2
    Arch-Σigmoid Ausphotography Regular ameerat42's Avatar
    Join Date
    18 Sep 2009
    Location
    Nthn Sydney
    Posts
    23,517
    Mentioned
    24 Post(s)
    Tagged
    0 Thread(s)
    It looks good. But in the picture, the tripod stem looks rather thin
    If you get any shake in your pics using this, the thin neck might be to blame
    CC, Image editing OK.

  3. #3
    Member
    Threadstarter

    Join Date
    29 Jul 2015
    Location
    Greensborough
    Posts
    1,655
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    I do not know why the tripod was wound up like that.

  4. #4
    Member formerly known as : Lplates Glenda's Avatar
    Join Date
    09 Sep 2011
    Location
    Gladstone
    Posts
    17,387
    Mentioned
    32 Post(s)
    Tagged
    0 Thread(s)
    I've seen the ad but didn't get one. Was sort of tempted as thought it would be handy for travelling. Thanks for sharing your thoughts and hope it does the job for you.
    Glenda



  5. #5
    Ausphotography irregular Mark L's Avatar
    Join Date
    21 Nov 2010
    Location
    magical Mudgee
    Posts
    21,586
    Mentioned
    34 Post(s)
    Tagged
    1 Thread(s)
    Quote Originally Posted by ameerat42 View Post
    It looks good. But in the picture, the tripod stem looks rather thin
    If you get any shake in your pics using this, the thin neck might be to blame
    Using live view and self time gets over camera shake.

  6. #6
    Arch-Σigmoid Ausphotography Regular ameerat42's Avatar
    Join Date
    18 Sep 2009
    Location
    Nthn Sydney
    Posts
    23,517
    Mentioned
    24 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Mark L View Post
    Using live view and self time gets over camera shake.
    Some of the time...

  7. #7
    Member
    Threadstarter

    Join Date
    29 Jul 2015
    Location
    Greensborough
    Posts
    1,655
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    I have found one minor set back. You have to attach your quick release to the tripod. So if you want to use the flexitilt as a stand alone, you have to detach the qr, from the ft. In my case I have to use a screwdriver.

    BTW.... I have 3 tripods. That one is my inside one and I use a remote release ( most of the time )
    Last edited by thegrump; 12-05-2017 at 5:51pm.

  8. #8
    A royal pain in the bum! arthurking83's Avatar
    Join Date
    04 Jun 2006
    Location
    the worst house, in the best street
    Posts
    8,777
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Mark L View Post
    Using live view and self time gets over camera shake.
    Not all cameras have liveview.
    And even then, some cameras were so badly designed that liveview can actually add to the mirror induced vibrations caused by non liveview mode!(I'm looking at you Nikon with the stupid implementation of Liveview on the D300 ... and D90)

    So, yes(to the above) sometimes .. but a big fat NO!!! sometimes

    Also should be known that some cameras only have liveview mode all the time(that is of course mirrorless), but it's a well known fact that some of those cameras, like the Sony A7 series have a shutter action violent enough to cause the same set of vibrations as a flapping mirror!
    The D800 twins can have a slight shutter induced shake, even with mirror lockup engaged and a delayed exposure.

    Electronic front curtain should eliminate this all together tho.

    Something that is not commonly talked about is that vibrations due to under engineered moving parts in a camera can be overcome by using an appropriately slower shutter speed!
    Much info on the advantages of using a faster shutter speed is declared by all and sundry, but people usually assume that a slow shutter speed causes vibration induced image unsharpness, which is not quite correct.
    An appropriately slow shutter speed causes blurring in an image under specific situations. if you can't speed up shutter speed to eliminate that blurriness, slowing down the shutter speed can help too!
    Nikon D800E, D300, D70s
    {Nikon}; -> 50/1.2 : 500/8 : 105/2.8VR Micro : 180/2.8 ais : 105mm f/1.8 ais : 24mm/2 ais
    {Sigma}; ->10-20/4-5.6 : 50/1.4 : 12-24/4.5-5.6II : 150-600mm|S
    {Tamron}; -> 17-50/2.8 : 28-75/2.8 : 70-200/2.8 : 300/2.8 SP MF : 24-70/2.8VC

    {Yongnuo}; -> YN35/2N : YN50/1.8N


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •