PDA

View Full Version : 7D + Sandisk, Err 02



infl3xion
17-12-2010, 3:16pm
Hey guys,

So I bought a Sandisk Ultra 16gb card yesterday.

Been testing it out, filling it up etc, ran into some Err 02's, happened twice yesterday as I filled the whole 16gb with raw+jpg shots. It seems to only happen when I shoot with the buffer full or close to. Tried it again today, happened once, filling the card.

All I have to do is open the card door, close it again, and the error is gone, don't even need to restart the camera or take the card out, seems to lose the pics that were to be written to the card though.

I previously had an older Ultra II, and never had a single issue with that.

Note: I purchased the card from an authorised Sandisk reseller, and there is no physical damage to my camera's card slot/pins etc.

So I did some googling, seems to be a relatively known problem:
http://photography-on-the.net/forum/showthread.php?t=921353
http://www.flickr.com/groups/canondslr/discuss/72157624104182494/
seems to also occur with the Extreme cards as well..

Anyone mind trying this out with a similar setup?

EDIT: sorry, placed this in the wrong section.

Gollum
19-12-2010, 10:21am
You are not the only one with this problem. Try and go direct to Canon with this problem and point to other posts around the world. If the tell you this is a card problem, get it in writing. If they refuse to provide a written statement then push them to fix the Camera.

It’s always easier for companies to blame the other guy.

Try and contact the guy who posted this and see if he has resolved the problem.

http://forums.sandisk.com/t5/Mobile-memory-professional-cards/CF-Ultra-16GB-Err-02-cannot-read-card-during-a-wedding-shoot/m-p/188652#M96

infl3xion
19-12-2010, 5:26pm
Hmm yea, thing is, there are people who've had both their cards and cameras replaced and the problems still persists..