PDA

View Full Version : Ram memory upgrade



KevPride
20-06-2010, 9:05pm
Because my desktop was running very slow opening Elements 7 I decided the 2 gig Ram needed upgrading. Bought the identical PNY 2gb DD2 800 and put it into the remaining available slot only to find I had only gone from 2gb to 3gb.

What gives ???

The sticker said 2gb but have I been duped or do I need to change some settings.

Any help would be appreciated.

ameerat42
20-06-2010, 9:08pm
Are you running any 32-bit operating system? Like Win XP? That's Y. DO a Google search using "3 gb limit". Actually do a forum search too. I'm sure it's been mentioned b4. Am.

ricktas
20-06-2010, 9:11pm
How many slots do you have? Were the previous 2 gb made up of 2 x 1gb chips? There is an issue with some motherboards that all the chip have to be the same size, otherwise it won't detect and use the full amounts. If this is true of yours, you have 2 x 1gb chips and a third one now acting like a 1gb one as well, if this is the cause you may need to get another 2gb chip and replace the existing 2 x 1gb ones.

KevPride
20-06-2010, 9:48pm
Thanks everyone for the advice - previous was a single 2gb Ram stick, but as I am still running on XP this seems the problem.

As it does actually run much quicker I am not that concerned.

Wayne
20-06-2010, 9:48pm
I would be inclined to agree it is a windows 32 bit OS limitation.

Tannin
20-06-2010, 10:14pm
No doubt about it. Nothing whatsoever to do with it being Windows XP, it is a 32-bit Windows limitation - Ameerat42 is spot on. Note that Vista and W7 are the same - to use more than about 3GB you need a 64-bit version of Windows XP, Vista, or 7.

Don't go jumping into that if you don't know exactly what you are doing!

Watchamacallit
21-06-2010, 10:04am
Also depends what SP, etc you have installed as a few times it can be as high as 3.5GB (i.e. my work laptop shows 3.45GB on 32bit XP).

If you want more, you'd need to go 64bit like everyone else has said.

Paul G
21-06-2010, 10:19am
Forgive me for crashing in on this topic but I have the same issue I believe, however I currently only have 1GB of RAM ( 2 x 512 sticks). I have four slots available (in total) so what would my best option be to upgrade? Just get 2 x 2GB sticks to still arrive at the 3GB maximum as has been said for a 32-bit system?

ameerat42
21-06-2010, 11:40am
Well, Paul, check the colour-coding of the slots. If they are in pairs of colour, then it'll be dual-channel ram that you're after. Then you'd need to get two matching sticks of RAM. If you're not going to, say, put a 64-bit OS on that computer, I'd say just get another two matching 512MB sticks. You'll only see 3-3.5 GB, but it'll be necessary for it to work at all. If you decide to install 64-bit OS, make them 2x1GB extra sticks. Be careful whichever you do, best to take you computer to someone and try the chips 1st. (I can, hope you can.) Am.

Paul G
21-06-2010, 12:02pm
Thanks Am. It is indeed dual channel and has two pairs of coloured slots. No plans to upgrade the OS at this stage. Just looking to give the system a little boost and maximise whatever performance I can. Mines based on a Pentium 4R and was built about 5 years ago now.

Tannin
21-06-2010, 12:17pm
Don't mess about half doing stuff.

The primary determinant of the exact amount of RAMG you see under 32-bit Windows is the motherboartd chipset.
But don't worry about that - you will get about 3GBG, plus a bit, minus a bit, wjho cares?
Your system will run perfectly happily with a single stick if you want to do that
It will run faster with two matched sticks
If you don't have a matched pair handy, it will still work just fine with two sticks of the same brand and spec.
Nobody makes 512MB RAM in any sort of quantity these days. You can maybe get it cheap second-hand because no-one wants it, but expect to pay way, way too much new
1GB sticks aren't much cheaper than 2GB ones.
Systems run more reliably with a smaller number of physical pieces of RAM - 2 is better than 4


Short answer: buy 2 x 2GB and remove your old 512MB sticks. Don't buggerise about trying to do it on the cheap - you will save a few pennies, no more. (But if a friend who upgrades offers you his pair of useless 512MB sticks for nothing, well, that's different.)

Kym
21-06-2010, 12:31pm
What Tony said ^^^

Watchamacallit
21-06-2010, 12:50pm
What Tony said ^^^

I second that. I would recommend checking what your motherboard supports before going out to upgrade.

Paul G
21-06-2010, 1:01pm
Okay then...wanted to buy, 2 x 2GB sticks of RAM :)
Seriously though - I've got Belarc Advisor up at the moment. Can I find the motherboard details you mention there?

Cage
21-06-2010, 1:39pm
Okay then...wanted to buy, 2 x 2GB sticks of RAM :)
Seriously though - I've got Belarc Advisor up at the moment. Can I find the motherboard details you mention there?


Google your motherboards model no and check the specs under RAM.

It will tell you the maximum amount of RAM your motherboard can support, and in what configuration.

Kevin

Paul G
21-06-2010, 2:06pm
This (http://www.neoseeker.com/Articles/Hardware/Reviews/abitaa8xe/2.html) is what I've got :th3:


ABIT AA8XE - motherboard - ATX - i925XE specifications
• General
• Product type (AE) Motherboard
• Form factor ATX
• Width 12.0 in
• Depth 9.6 in
• Compatible Processors Celeron D , Pentium Extreme Edition , Pentium 4 , Pentium 4 Extreme Edition
• Mainboard processor socket LGA775 Socket
• Chipset Type Intel 925XE Express / Intel ICH6R
• Data bus speed 1066.0 MHz
• Storage key information ATA-100 , Serial ATA-150 (RAID)
• Power connectors 24-pin main power connector
• Processor
• Installed Qty (Max Supported) 0.0 ( 1.0 )
• Memory
• Supported RAM Technology DDR2 SDRAM
• Supported RAM Integrity Check Non-ECC
• RAM Installed ( Max ) 0.0 MB / 4.0 GB (max)
• Supported RAM Speed PC2-3200 , PC2-4300
• RAM Features Unbuffered , Two DDR channels
• Audio
• Audio Output Sound card
• Sound Output Mode 7.1 channel surround
• Audio output compliant standards High Definition Audio
• Telecom / Networking
• Networking Network adapter - Ethernet , - Gigabit Ethernet , - Fast Ethernet
• Features
• BIOS Features Hyper-Threading Technology
• Expansion / Connectivity
• Expansion Slots Total (Free) 4.0 PCI Express x1 - DIMM 240-pin , 2.0 Memory - LGA775 Socket , 1.0 PCI , 3.0 Processor , 1.0 PCI Express x16
• Storage Interfaces ATA-100 - connector(s): 4 x 7pin Serial ATA - 2.0 device(s) - RAID 0 / RAID 1 , Serial ATA-150 - connector(s): 1 x 40pin IDC - 4.0 device(s)
• RAID features Intel Matrix RAID Technology
• Interfaces 1.0 x Audio - IEEE 1284 (EPP/ECP) - Mini-phone stereo 3.5 mm , 1.0 x Serial - Ethernet 10Base-T/100Base-TX/1000Base-T - Mini-phone stereo 3.5 mm , 1.0 x Keyboard - Line-out (side surround) - 6 pin FireWire , 1.0 x Parallel - Line-out (center/subwoofer) - 6 pin mini-DIN (PS/2 style) , 1.0 x Network - RS-232 - Mini-phone stereo 3.5 mm , 4.0 x Audio - Input - Mini-phone stereo 3.5 mm , 1.0 x Audio - Line-out (rear) - Mini-phone stereo 3.5 mm , 1.0 x Hi-Speed USB - Line-in - TOSLINK , 1.0 x Audio - Line-out - Mini-phone 3.5 mm , 1.0 x Audio - SPDIF input - 25 pin D-Sub (DB-25) , 1.0 x Audio - SPDIF output - 4 pin USB Type A , 1.0 x Microphone - Generic - 9 pin D-Sub (DB-9) , 1.0 x Mouse - Line-in - TOSLINK , 1.0 x Audio - Generic - 4 pin MPC , 1.0 x Audio - 6 pin mini-DIN (PS/2 style) , 1.0 x IEEE 1394 (FireWire) - RJ-45
• Additional connectors (optional) 2 x IEEE 1394 (FireWire) , 4 x Hi-Speed USB

SnowA
21-06-2010, 2:21pm
Something like this should do it.
http://www.arc.com.au/pub.php?gid=23447&pid=34984&p=product

Paul G
21-06-2010, 3:21pm
Cheers Snow. Bit pricier than I thought. Might have to go the second-hand route if anyone's got some lying around unused.

fillum
21-06-2010, 3:47pm
Paul, you could just email those specs off to site advertiser Cheap Chips (www.cheapchips.com.au) and they'll let you know what you need. Personally, I'd just get a couple of 1gb sticks (around $40 a stick for DDR2) and use in conjunction with your existing RAM.


Cheers.

SnowA
21-06-2010, 3:47pm
You could go generic rather than brand name ram. 2GB sticks in DDR2 will start around the $60 mark.

Paul G
21-06-2010, 3:56pm
Thanks for the tips guys. I might email Cheap Chips and see what they've got.

maccaroneski
21-06-2010, 4:11pm
You should be able to pick up 1GB sticks for under $40.

Cage
21-06-2010, 9:04pm
From the Abit website's specs on your mobo. They usually make a note if the board only supports 3GB with a 32 bit O/S.


http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NAME=Fatal1ty+AA8XE&fMTYPE=LGA775


Memory

Four 240-pin DIMM sockets
Supports Dual channel DDR2 533/400 Un-buffered Non-ECC memory
Supports maximum memory capacity up to 4GB

Cheers

Kevin

Watchamacallit
21-06-2010, 10:42pm
There are a few places where you can pick up like Gkill or Patriot DDR2-800 4GB kits for around $120.

Watchamacallit
29-06-2010, 12:23pm
Unsure if the O.P. was still wanting to upgrade, but if you're quick this might be of use:

4GB Kit KVR800D2N5K2/4G
http://pricesengine.com/

JM Tran
29-06-2010, 1:00pm
does anybody know where I can get 2x 4GB sticks of RAM for a decent price? Everywhere Ive seen is around $400-500 mark

Watchamacallit
29-06-2010, 1:03pm
does anybody know where I can get 2x 4GB sticks of RAM for a decent price? Everywhere Ive seen is around $400-500 mark

DDR2? DDR3? What specs do you need, etc? Also, what usage is the computer for (i.e. gaming machines like speed/latency trade offs, graphics probably don't care about slower latency, etc).

Your CPU and motherboard would also play a part as there is no point sticking fast RAM into a slow mobo.

JM Tran
29-06-2010, 1:05pm
DDR2? DDR3? What specs do you need, etc? Also, what usage is the computer for (i.e. gaming machines like speed/latency trade offs, graphics probably don't care about slower latency, etc).

Your CPU and motherboard would also play a part as there is no point sticking fast RAM into a slow mobo.

oops should have told you more, its DDR3 for the new macbook pro running i7 core 2.66GHz, and an SSD, for photo editing and some gaming also, currently has the 4GB of RAM standard, off the top of my head.

Paul G
29-06-2010, 2:03pm
Just an update on mine...

I purchased 2 x 1GB sticks through a friend on the forum here; Thanks Tom (dieselpower83). Added these to the original 2 x 512 sticks. Was hoping for around 3GB Ram from this but ended up with about 2.5/2.6 as the last stick of 512 doesn't seem to be being recognised. I'm still happy with the result though as the processing speed in CS4 etc has improved noticeably. The only downside at present is that for some strange reason the computer now takes a lot longer to boot up than it used to? If I had the cash I would have gone with 2 x 2GB sticks but like I said I'm happy with the improvement for a $70 outlay.

Watchamacallit
29-06-2010, 2:52pm
Just an update on mine...

I purchased 2 x 1GB sticks through a friend on the forum here; Thanks Tom (dieselpower83). Added these to the original 2 x 512 sticks. Was hoping for around 3GB Ram from this but ended up with about 2.5/2.6 as the last stick of 512 doesn't seem to be being recognised. I'm still happy with the result though as the processing speed in CS4 etc has improved noticeably. The only downside at present is that for some strange reason the computer now takes a lot longer to boot up than it used to? If I had the cash I would have gone with 2 x 2GB sticks but like I said I'm happy with the improvement for a $70 outlay.

Sounds good. You could try looking at the SP packs for XP, etc (the may increase the addressable RAM - I believe the OS does funky magic here). If not, 64bit would be the only way but oh well. As for the speed decrease, seems a little unusual - you could try switching the memory sticks around (so the 2x1GB sit where your 512s used to sit, just make sure they are still paired up correctly).



oops should have told you more, its DDR3 for the new macbook pro running i7 core 2.66GHz, and an SSD, for photo editing and some gaming also, currently has the 4GB of RAM standard, off the top of my head.

Now this cold be a toughie, as 4GB sticks are generally expensive and I just verified that MacBook Pros run 1066MHz. A quick look has the majority around the $400-500 mark as you mentioned, maybe email cheapchips and mention ausphotography and see what they can do? If they don't supply 4GB sticks, I can direct you to a few places depending on your location.