PDA

View Full Version : Zeiss Camera



davidd
18-10-2009, 12:45pm
Hi

I have an old (1930's) Zeiss Ikon camera, which I inherited from my father.
It has a bit of a story, my father and 4 other POW's bought the camera from a German POW guard for 150 cigarettes (which they got from Red Cross parcels) near the end of the war. The 5 POW's then drew cards to see who actually got to keep the camera, and my father drew high card (he said it was the only thing he ever won!) So the camera cost him 30 cigarettes.

I remember him using this camera to take family snaps when I was a child, and seeing the sometimes blurred small black and white photos which were in the family album.

In memory of my father I would like to shoot a roll of black and white film with this camera this Christmas, when all the family is together. I believe it uses 120 roll film. Does anyone know? It says '2 1/4" x 3 1/4" ' inside, so I presume this is the negative size. What film should I buy? Can I still get film for this camera?

The camera appears to be in working order, the aperture control works (f6.3 to f22) and so does the shutter speed control (1/25 to 1/125 sec). The shutter opens and closes OK.
The bellows appears to be light tight, so I see no reason why it shouldn't work. I will get a light reading from my D300 and apply the settings.

Any advice?

ving
18-10-2009, 1:32pm
cant help ya but that is one very cool lookin camera :D

ameerat42
18-10-2009, 1:40pm
Hi davidd. Here are some websites that I found, by typing "zeiss-ikon novar camera"...
http://photo.net/classic-cameras-forum/00Mm2O
http://www.pibweb.com/ross/Campix/Zeissikon.htm (but none here list the Novar lens)
There are others, but...
This could be a 6cmx9cm 120 rollfilm camera. I had a rather silmilar Kodak one decades ago. In your picture the lens looks as if there is no anti-reflection coating (mine was from the 1950s and did have an early type coating), so you might try to avoid shooting close to any strong light source, say keep them at least 30 degrees away from the lens axis. Have you "checked" the shutter speeds? Your longest is 1/25 sec. Check that this doesn't sound like, say, a half a second. A roll of ISO 100-160 would suit these shutter speeds and aperture stops. I'd be interested to see any results. Am...

ameerat42
18-10-2009, 1:42pm
PS. My Kodak gave quite good results. I had a shot of Sydney Hbr, SH Bridge, and Opera House from about 1976, taken from the air. Of course I just can't find it now, can I!!! Am...

davidd
18-10-2009, 1:50pm
Hi, thanks for the reply.

Yes, it is a 6x9cm, that is also printed inside the back cover.

So 120 roll film is what I need?

The shutter speed appears to be reasonably accurate, ie 1/100 sounds much faster than 1/25, and seems to be what I would expect. The aperture closes down OK when set to different apertures. I'll give it a try!

Cheers.

TOM
18-10-2009, 2:00pm
yes you need 120 film. if you are going to shoot black and white, there are a couple of options. you can use a c41 black and white film which can be developed at any 1 hour photo lab. this film has a very clean look, but it does differ from traditional black and white film. if you want more of a vintage look, with beautiful tonality and a bit of grain, then i would suggest kodak tri-x 400 or ilford hp5+ 400. you might have to send these to a pro lab to get developed, or ofcourse you can develop them yourself in your laundry. you don't need a darkroom to develop film at home, you only need a dark room to print.

ameerat42
18-10-2009, 2:05pm
I'd say 120 is the one, though there (I'd better now say) was a 620 film. From memory, though, as I never used it, the only difference was that the 620 had more of the same sized film wrapped onto a spool with a thinner shaft. That spool would not fit into a 120 camera because of the different slots at the ends (this process may be off the track, bet see... http://www.inficad.com/~gstewart/respool.htm)
Just check with the picture of the spools in this reference and try to gauge if they match the camera you have. In fact, you should have an old spool still in it, as the film rolls off the new spool onto the old, and so on. So whatever you do, DON'T throw out any old spools. You'll need a take-up spool to work the camera. If you are in the Sydney area you can get Fujicolor Pro 160S in a 5 pack for $47.40, but I'd better let you know where from in a PM. But typically, that film is $10-12 a roll. You'll get 8 shots in 6x9 format per roll. Am...

ameerat42
18-10-2009, 2:12pm
yes you need 120 film. if you are going to shoot black and white, there are a couple of options. you can use a c41 black and white film which can be developed at any 1 hour photo lab. this film has a very clean look, but it does differ from traditional black and white film. if you want more of a vintage look, with beautiful tonality and a bit of grain, then i would suggest kodak tri-x 400 or ilford hp5+ 400. you might have to send these to a pro lab to get developed, or ofcourse you can develop them yourself in your laundry. you don't need a darkroom to develop film at home, you only need a dark room to print.

Hi Tom. I just wondering if wouldn't ISO 400 would be too fast for most normal outdoor photography for this camera? It's max is 1/125 sec at f/22. Am...

davidd
18-10-2009, 2:47pm
Hi thanks for all the help!

I'm pretty sure it uses 120 film, I remember my father buying it. I was interested in cameras as a child, and have shot with this one before, but probably not for 50 years.

I have discovered an old piece of paper in the case, with settings written in my father's handwriting. The paper is from a box of Kodak Verichrome Pan Film (colour film I presume) of ISO (ASA) 125. The settings are Bright sun f22 at 1/125, hazy sun f16 at 1/125, cloudy f8 at 1/125.

The old 'sunny 16' rule says f16 at 1/100 for ISO 100 film in sunlight. ISO 400 would be too fast in sunlight. ISO 100 in open shade maybe f11? This is probably the best aperture to use for this lens. Can I get ISO 100 b&W film? I can but try!

TOM
18-10-2009, 3:13pm
you sure can...ilford fp4 is a 125asa, you can also get fuji acros 100. there are quite a few to choose from. acros is a great modern film with fine grain.

wongyboi
18-10-2009, 3:15pm
Great story behind that camera.

Analog6
18-10-2009, 5:22pm
That looks to be in remarkably good condition and I would say it is probably worth a bit. Look after it!

You may be able to find out more about ti at photo nets Classic camera forum here (http://photo.net/classic-cameras-forum/)

There is 120 film on ebay but you'd have to be careful http://cameras.shop.ebay.com.au/Film-/4201/i.html?_nkw=120

davidd
18-10-2009, 6:07pm
Hi

My research would suggest it is worth about $50 US, so not the large inheritance I was hoping for.:D

It apparently has a lesser quality lens and shutter than the top of the range. I would think it was probably standard German Army issue.

Q97
18-10-2009, 10:19pm
So it is probably still worth 150 cigarettes :)

Gregg Bell
19-10-2009, 3:26am
it looks like a medium format nettar.

I @ M
19-10-2009, 5:44pm
A great way to create some memories David, all the best in your endeavours experimenting with yet another fascinating aspect of photography.

davidd
19-10-2009, 8:48pm
Hi

thanks to all for the information and interest. I will keep you informed (after Christmas).

Cheers

GlennSan
19-10-2009, 9:24pm
I hope your results are successful. As Tom suggested, some 120 roll film like Ilford FP4 or HP5 would likely be the ideal film to try although you could try some 120 colour film if you want to. The old uncoated lenses may flare badly and lack some contrast but I recently ran a roll of modern colour print film through my 50 year old 35mm folder and the results were first class. You may be equally surprised.

Coincidentally, I have a *very* similar camera that I picked up at a flea market a few years back for, I think, $25. Pictured below. I occasionally use it to shoot B&W that I process and print myself. The results can be quite decent. One issue you will have though is getting the negs printed, assuming the camera exposes correctly and the bellows are light tight. 6x9 will very likely require a pro-lab or someone who does B&W printing at home and is equipped for 6x9 format negs. Your local fast photo shop is most unlikely to be able to handle these georgeous large negs but persist because the results just might be superb. Big negs = very creamy enlargements :th3:

Good luck and do let us know how you get on!

GlennSan
19-10-2009, 10:10pm
Your post encouraged me to go searching for any prints off the Ziess folder. I was only able to easily find the proof sheet from my very first roll through it and a very rough work print. See below for hastily scanned images.

Some extra advice since you asked for it. Aiming through the albada viewfinder can be a bit hit and miss as you can see from my proof sheet. :D Also, don't forget to set your exposure and focus for EVERY frame; again, you see the errors I made with the water fall - I didn't adjust exposure correctly.

If you want the best chance of a memorable photo or two at Christmas, I suggest you put a couple of rolls through soon to figure out if the camera works and how you'll do your processing / printing. I wonder if you have any of your father's original "Small blurry prints" as you called them. It occurred to me that they might be actual contact prints that were then cut into seperate actual-size images. If they measure just smaller than 6cm by 9 cm then I'd say that is what you have. In that case, you could follow that process yourself with some mucking around but you would NOT require an enlarger. It's food for thought.

davidd
20-10-2009, 1:17pm
Hi

an update - I went to the local Camera House to see what they had in 120 roll film. I ended up buying a roll of Fuji colour film, marked REALA 100. It is ISO 100. I will give this a try this weekend to test and see if the shutter is reasonably accurate, I will get a reading from my D300 and then shoot at those settings, plus one and two stops faster to see if the shutter is dragging.

Processing is $6.95 and they do it in house, plus they will scan the negative for an extra $6.00, so that seems to be the best way to see how the shots turn out.

One thing I am not sure of, how do you know if you have wound the film past the already exposed part? There is a small window with red glass in the back, with a sliding cover. I guess you look through this as you wind the film on. As the same film is used for 6x6 and 6x9 format, are there markings on the edge of the film you can read? As a young boy in the distant past I had a small Kodak Brownie 127 , but can't remember exactly how it worked.

Thanks for all the advice.

davidd
20-10-2009, 1:40pm
Hi one other thing :o

The timer on the shutter doesn't work any more, it ticks a few times and stops, and you have to push the lever on manually.

Does anyone have any suggestions for something to clean/lubricate the timer arm (it is the one with the red dot on it). I don't want to get anything near the shutter mechanism.

GlennSan
20-10-2009, 1:44pm
Great news on the processing / scanning part - sounds easy now!

As for the ruby window - you are correct, after loading and closing the back, watch through the ruby window and wind SLOWLY and you'll see a small circle, then a couple of bigger circles then a circle with a number "1" in it. STOP there as the number indicates the first frame. Once you've exposed, just wind again until number "2" shows up in the circle. Don't overwind because you can't wind back. Once you've reached the last frame, no more numbers will show up so then just keep winding until you feel the backing paper leave the feed spool and then wind some more to ensure it's all on the takeup spool. Then open the camera back, remove the takeup spool carefully and immediately lick/stick the tab to TIGHTLY close the roll up. I also suggest you store it in a lightproof bag/box until you drop it into the photo shop for processing. While reasonably lightproof with the backing paper, I learned to my regret that leaved a tightly bound roll out in the room light for a few days can lead to light bleeds into the edge of the roll.

As for two windows, yes, there is a 6x9 window and a 6x6 window. On my camera, I have the wire frame mask that you can fit into the back of the camera to use it as a 6x6 if you want to. If you have the mask, you can decide before you load a roll if you want to shoot 6x6 or 6x9. Naturally you can't change your mind until the next roll.

Good luck with the experiment - keen to see your results.

P.S. Did I mention to take care to put the roll in the right way around? I've put it in backwards once in my Mam645 and didn't I feel like a numbskull :)

GlennSan
20-10-2009, 1:47pm
Hi one other thing :o

The timer on the shutter doesn't work any more, it ticks a few times and stops, and you have to push the lever on manually.

Does anyone have any suggestions for something to clean/lubricate the timer arm (it is the one with the red dot on it). I don't want to get anything near the shutter mechanism.

From what I've read over the years, it's a specialised task that appears to usually require a full shutter dismantle/clean/lube. I have a similar issue with the self timer on a couple of my folders but have never attempted to do the CLA. Google will bring back detailed howto notes with any luck.

Kevin M
21-10-2009, 5:27pm
there is a photo lab in the city in the Myer centre that does process 120 roll film as I just bought a roll myself from them & checked with them too. They are even selling "new" TLR film camera's which are obvious knock offs of the old models. must admit they do look like fun to use.

GlennSan
21-10-2009, 10:47pm
there is a photo lab in the city in the Myer centre that does process 120 roll film as I just bought a roll myself from them & checked with them too. They are even selling "new" TLR film camera's which are obvious knock offs of the old models. must admit they do look like fun to use.
Thanks Kevin, that's very handy to know. The last two rolls of colour 120 I had done at problab at south brisbane cost me an arm and a leg. :(

Tony
06-07-2010, 9:24pm
Hmmm... probably a little late for this thread but here goes. 1. The era this camera was made is best suited to SLOW black and White film. You see contrast was already in the film of that time so the lens was ground for sharpness no need to worry about contrast. Without looking up my old books I'd say your camera has a Tessar based lens (4 elements in 3 groups). I used to have a camera repair business and my training was in the optical side of things. You need to match films of the same era to these sort of cameras... Then they can often knock your socks off! Ps. try to use some sort of lens hood. Cheers Tony. 2010